; sos pattern recognition and tracking code parameters
; sminhit(i)   minimum number of hits in each space point (one for each chamber)
; smin_combos(i) minimum number of pairs in each space point ( one per chamber)
; sspace_point_criterion(i) minimum separation of distinct space points
;
	smax_pr_hits = 25, 25
        smin_hit =      5, 5
        smin_combos =   6, 6
        sspace_point_criterion = 1.2, 1.2 
;
; The following four criteria are applied to the stub fit results at the
; focal plane position to link stubs to tracks
; sxt_track_criterion  
; syt_track_criterion
; sxpt_track_criterion
; sypt_track_criterion
       sxt_track_criterion  = 100.
       syt_track_criterion  = 20.
       sxpt_track_criterion = 1.0
       sypt_track_criterion = 1.0
; ssingle_stub            If .ne. 0 make a track of all single stubs
  ssingle_stub = 0
; turn on/off small angle approximation to left/right decision for y
  sSmallAngleApprox = 1
;
; Crude track selection criteria in s_physics
; ssel_chi2_fpperdegmax   maximum chi2 per degree of freedom for track
  ssel_chi2_fpperdegmax = 9999999.
; ssel_dedx1min           minimum dedx to chose best track in scin 1
  ssel_dedx1min = -1000000.
; ssel_dedx1max           maximum dedx to chose best track in scin 1
  ssel_dedx1max = 1000000.
; ssel_betamin            minimum track beta to chose best track 
  ssel_betamin  = -1000000.
; ssel_betamax            maximum track beta to chose best track 
  ssel_betamax  = 1000000.
; ssel_etmin              minimum track et to chose best track 
  ssel_etmin = -1000000.
; ssel_etmax              maximum track et to chose best track 
  ssel_etmax = 1000000.
; ssel_ndegreesmin        minimum number of degrees of freedom for track
  ssel_ndegreesmin = 1
; sstat_maxchisq          chisquared limit for tracks used to measure hodo. eff.
  sstat_maxchisq = 10.
; sstat_slop              distance from center of scin. to count as expecting hit
;              must be < 2 cm. since s1y and s2y scins. are only +/- 2cm in size.
  sstat_slop = 1.
; sstat_mineff            warning level for scin. effic.
  sstat_mineff = .95
; sstat_cal_maxchisq      chisquared limit for tracks used to measure cal. eff.
  sstat_cal_maxchisq = 10.
; sstat_cal_slop          distance from center of block to count as expecting hit
  sstat_cal_slop = 2.
; scer_min_eff            warning level for cerenkov effic.
  scer_min_eff = .90
; scer_threshold          threshold for good hit (for measureing effic.)
  scer_threshold = 0.5
; sdc_min_eff             warning level for dc raw effic.(1 per plane)
  sdc_min_eff = .96,.96,.96,.96,.96,.96
                .96,.96,.96,.96,.96,.96
; sdc_min_wire_eff        warning level for wire effic, measured using tracking
  sdc_min_wire_eff = .85
; sdc_min_plane_eff       warning level for plane effic, measured using tracking
  sdc_min_plane_eff = .95,.95,.95,.95,.95,.95
                      .95,.95,.95,.95,.95,.95
  sxloscin  = 2, 3
  sxhiscin  = 8, 14
  syloscin  = 2, 2
  syhiscin  = 8, 8
;  strack_eff_test_scin_planes is the number of planes nec needed to 
;  set sweet spot to true. 4 is extra clean, 3 is good enough for e-'s.
  strack_eff_test_num_scin_planes = 4