; Old charge calibrations from Run 16707; BCM1 in gain pos 1, BCM2 in
; gain position 2

;point to scaler indices for BCM's
  gbcm1_index = 321
  gbcm2_index = 322
  gbcm3_index = 323
  gunser_index = 324

;gain factors for three cavity monitors
;csa 10/19/99 -- This is from run 28180, for run period II (here
;we don't use the linear fit from run period I).
;gbcm1_gain = 0.00027498              ; microA/Hz
;gbcm2_gain = 0.00028417              ; microA/Hz;
;gbcm3_gain = 0.00049738              ; microA/Hz
;gunser_gain = 0.00025006              ; microA/Hz

;zero offsets for BCM s
;gbcm#_offset are average values, found from the linear fit of all BCM calibration 
;runs of e94110
;csa 10/19/99 -- This is from run 28180, for run period II (here
;we don't use the linear fit from run period I).
;gbcm1_offset =  251654.              ; Hz
;gbcm2_offset =  251258.              ; Hz
;gbcm3_offset =  249866.              ; Hz
;gunser_offset =  446522.              ; Hz

;gain factors for three cavity monitors
;Liang 03/23/2000 -- recalibrated from run 28180
 gbcm1_gain = 0.00027932              ; microA/Hz
 gbcm2_gain = 0.00028870              ; microA/Hz
 gbcm3_gain = 0.00050404              ; microA/Hz
 gunser_gain = 0.00025006              ; microA/Hz

;zero offsets for BCM s
 gbcm1_offset =  253683.              ; Hz
 gbcm2_offset =  253247.              ; Hz
 gbcm3_offset =  250788.              ; Hz
 gunser_offset =  446348.              ; Hz

;define the threshold current at which beam is "on". (in microamps)
 g_beam_on_thresh_cur = 5.

;point to hardware clock (1MHz scaler, scaler channel 325)
  gclock_index = 325
  gclock_rate = 1.e+6

; Raster-gated scalers (csa 7/99)
 gbcm1_gated_index = 327
 gclock_gated_index = 328
 gfr_adc_thresh = 1000